Commercial and Residential Utility Connections, Serving Baltimore for 18+ Years
New builds, subdivided lots, or added units need a water meter installation in Baltimore City and the sewer tied into the city main before anything can run. This work requires permits, proper depth, and a tie-in that passes city inspection. BFMD Plumbing installs meters and connects water and sewer lines to the mains across the Baltimore area, handling excavation, permitting, and inspection as one job. We leave the property connected to city water and sewer, built to code and signed off.
Water Meter Installers
Written Pricing
City water and sewer connections need permits, proper tools, and careful underground work. A meter at the wrong depth or a sewer tie-in that fails inspection can delay the project and mean digging again. BFMD Plumbing handles water meter installation in Baltimore City and the sewer main connection from the property to the city line, coordinating the dig, the permit, and the inspection. For residential and commercial projects, we make the connection to code and confirm it before the trench is closed.
When meter or sewer connection issues affect a property, we respond quickly and get the work done right.
Bringing city water and sewer to a property takes permits, proper depth, and connections that pass inspection. BFMD Plumbing LLC handles meter sets and sewer main connections from excavation through final inspection with one licensed crew.
A new or split property needs a meter set and plumbed to the city supply before water can run. Our water meter installation service sets the meter and setter at the correct depth, connects it to the service line, and coordinates the city’s meter and inspection. The meter is live and the connection confirmed before the trench closes, keeping the project on schedule.
Some properties need a second meter to separate indoor water use from outdoor supply lines, irrigation systems, or pool maintenance. BFMD Plumbing installs secondary meters and connects them to the service line, allowing the property to track outdoor consumption independently. A properly installed secondary meter can reduce sewer charges on water that never enters the drain system.
Tying a new lateral into the public system is permitted work that must meet the city’s slope and depth requirements. BFMD Plumbing handles the home sewer line connection to the main sewer, running the lateral from the building to the city line and making the tie-in to code. The connection is inspected before backfill, and nothing is buried until it passes.
An existing lateral that has separated, cracked at the junction, or shifted away from the city main needs a targeted reconnection rather than a full replacement. We excavate to the tie-in point, reseal or refit the joint to the city standard, and restore the surface once the connection is confirmed. A properly sealed lateral joint at the main prevents infiltration, root regrowth at the junction, and the recurring backups that follow.
Method
Every connection is located, permitted, dug, and inspected in the same order. We work to the city’s requirements from the first locate to the final sign-off.
Before any digging, we mark the city main and the utilities around it and pull the required Baltimore permit. The utility locate confirms the main’s exact position and depth so the trench line and tie-in point are set before any ground is opened. The permit keeps the dig legal and protects the property owner throughout the job.
For any sewer lateral or water service connection, we open a focused trench from the building to the city line at the correct slope and depth. The dig is shored and kept as tight as the connection allows. Keeping the trench narrow limits surface disruption and reduces restoration work once the connection passes inspection.
We set the meter or make the connection to the main sewer line, sealing the tie-in to the city’s material and slope standards. The water connection is plumbed at the meter, and the sewer joint is fitted at the main. Each connection is built to pass inspection, not just to hold.
The city inspects the open connection before anything is covered. Once it passes, we backfill, compact, and restore the surface to the condition we found it. The signed inspection record is included with the paperwork handed to the property owner before we leave.
A utility connection ties into the public system, so the city sets the standard and inspects the work. Every meter and tie-in we make meets Baltimore code and passes before backfill.
We pull the Baltimore permit and pass the city inspection on every connection.
BFMD Plumbing works under Maryland plumbing licensing and full insurance.
Meters, depths, and tie-ins meet the city’s material and slope requirements.
We backfill, restore the surface, and hand you the paperwork for your records.
Common Questions
Yes. Baltimore requires a permit for water meter installation and for any connection to the public water or sewer main, and only a licensed contractor can pull it. BFMD Plumbing handles the permit and the required inspection as part of the job.
The city owns the water and sewer mains in the street, while the property owner owns and pays for the service lines and the connection from the building to those mains. That includes the meter setter and the sewer tie-in on your side. BFMD Plumbing builds and connects the owner’s side to city standards.
A meter set is often a single day, while a sewer main connection that needs excavation and a city inspection usually runs one to a few days depending on depth and access. The permit and the city’s inspection schedule affect the timeline. BFMD Plumbing gives you a schedule once the site is scoped.
Yes, we install the meter, run the new service line, and make the connection to the city water and sewer mains, then handle the permit and inspection. Moving off a well or septic is a common reason owners call for this work.
Cost depends on the distance to the main, the depth, the surface being crossed, and the city’s fees, which makes the range wide. A meter set is the lower end, while a sewer main connection requiring excavation and restoration costs more. BFMD Plumbing confirms a written price after scoping the site, and the city’s connection or tap fees are separate.
A problem with the meter or sewer tie-in can mean delays, repeat excavation, and extra costs. BFMD Plumbing takes care of the connection and permitting process to help avoid unnecessary rework.
Below you will find the counties and cities that BFMD LLC serve.
Click on the county to view the list of cities where we provide our professional plumbing services.
